What You Need to Know About Home Power Washing

What is the importance of home power washing being done at least once a year. Not only will this get rid of all the built-up dirt, dust, and grime, but it will also help to protect your home from mold and mildew. Here are some tips on how to power wash your home safely and effectively!

Before you power-wash your home, make sure that it’s not a windy day. You don’t want to be spraying water all around and possibly against the side of your home. It can cause damage if there is too much water pressure or the wrong nozzle is used for cleaning. The best time to power wash your home is in the late afternoon when wind speeds are usually at their lowest.

The first step in home power washing is to inspect and clean gutters and downspouts before starting any other work on the exterior of your home. Once this initial task has been completed, pull any weeds from along the foundation and painted surfaces, especially between bricks and stones where mildew often forms. If plants such as vines have encroached on the lower portion of your home, remove these before power washing.

After you have made sure that the exterior is clean and free of potentially hazardous overgrowth, secure all loose or lightweight objects to make certain they don’t blow away. The last thing you want during this process is for something to accidentally get hit by a stream of water coming from your spray nozzle.

If there are any areas in your house that are especially dirty or where mold has grown, treat them first with a solution of one part bleach to nine parts water. Be careful not to use more than this amount, though. Bleach can damage the paint job if too much is applied! After waiting about 15 minutes for it to dry, repeat the power-washing steps below starting with the first one.

Be sure that you never let the stream of water come into contact with window screens or siding on your home because this can cause damage. If there are any areas where the paint has started to peel, be careful not to spray too deeply against it as this may remove more than just mildew and dirt. Also, avoid spraying directly underneath eaves and overhangs because there is a risk of splashing back up onto wood surfaces due to high-pressure water flows.

After you have finished power washing your house, be very thorough when it comes time to rinse off all remaining soap residue so that it doesn’t dry onto surfaces such as bricks, shake shingles, and stone veneers. To do this effectively, make sure that you spray water evenly and slowly on all surfaces. Let it sit for 10 to 15 minutes and then rinse once more, again using a slow and steady motion.

After your house is thoroughly cleaned, wait at least three days before using any chemical cleaners or detergents on treated surfaces as they could cause problems with the paint job that has been carried out. If mold or mildew appears to be growing again after this time period, consider having your house re-power washed by a different company as those from last time may have used the wrong chemicals to finish the task!

In conclusion, power washing your home should not be a difficult task if you follow these simple steps. It doesn’t take a lot of experience or special equipment to carry out, either. After all, this is why many people hire power washing companies to do the job for them!